Panda ERP

The machine is down; the last service date is in the foreman's notebook and the spare part is unknown

The Maintenance Management module keeps the equipment card, periodic maintenance plan, breakdown record, spare parts stock and safety step in one record. Upcoming maintenance lands on a list, and a breakdown becomes a work order.

Maintenance management
In short

Maintenance Management is the Panda ERP module that keeps every piece of equipment on a card with its location, warranty, meter and maintenance history; turns periodic and predictive maintenance plans into a calendar; converts a breakdown report into a work order and assigns it to a technician; and links spare parts stock to the maintenance job. Planned maintenance is deducted from production capacity, and downtime is recorded on the work order as a stoppage reason.

How is this work done today?

  • The maintenance plan is on a wall calendar

    Periodic maintenance dates are in the foreman's notebook; a skipped service is discovered when the machine stops, and records are written afterwards.

    1 maintenance chief × 2 hours / week
  • Breakdowns are reported by phone

    The operator reports the breakdown by phone, and until the technician arrives nobody knows what happened; downtime is written down as an estimate.

    2 people × 30 minutes / breakdown
  • The spare part is missing exactly when needed

    Bearing and belt stock in the maintenance workshop cupboard is never counted; the missing part is requested from purchasing with an urgent phone call at the moment of breakdown.

    1 person × 1 hour / breakdown

How does Maintenance management work?

  1. 1

    The equipment card is opened

    Machines, lines and devices are kept on a card with location, serial number, warranty, meter and maintenance instruction. The existing list is imported from Excel.

  2. 2

    The maintenance plan becomes a calendar

    A time-based or running-hours-based periodic maintenance plan is defined; upcoming maintenance lands on a list, a work order is opened, and planned downtime is deducted from production capacity.

  3. 3

    A breakdown becomes a work order

    The operator reports the breakdown from a tablet or phone; the report is prioritized and assigned to a technician, and start-finish times and parts used are written to the work order.

  4. 4

    Parts, cost and report

    Spare parts are deducted from stock by the maintenance job and a request is opened at the critical level; breakdown frequency, downtime and maintenance cost by equipment appear in the report.

See how Maintenance management would work in your business

Tell us briefly about your process and we will walk through the screens with your own example.

  • Reply the same business day
  • 15+ years of experience
  • 90 client businesses

Maintenance management features

Maintenance management: Equipment and asset card
  • Equipment and asset card

    Location, serial number, warranty period, meter, technical document PDF and the whole maintenance history on one card; custody is shared with the Fixed Assets module.

  • Periodic maintenance plan

    A calendar or running-hours based plan; the list of upcoming maintenance and the checklist go down to the work order, and completed steps are ticked.

  • Predictive maintenance

    Sensor and meter data is written to the equipment card; an out-of-threshold temperature, vibration or meter value lands on the maintenance chief's list.

Maintenance management: Breakdown report and work order
  • Breakdown report and work order

    The operator opens a breakdown from the phone and attaches a photo; the work order is prioritized and assigned to a technician, and downtime is posted to the production report.

  • Spare parts stock

    The maintenance workshop warehouse keeps its own stock; parts used on a work order are deducted, and the critical level turns into a purchase request.

  • Safety and risk

    A risk analysis and a lockout-tagout step are linked to the maintenance work order; the work order cannot start until the step is approved, and it stays in the audit log.

  • Production link

    Planned maintenance is deducted from workstation capacity; breakdown time is marked automatically on the production work order as a stoppage reason.

  • Maintenance reports

    Breakdown frequency by equipment, mean time to repair, maintenance cost and plan compliance; output as Excel and PDF.

What does Panda AI add to Maintenance management?

The Production and Planning Agent is the Panda AI agent that answers, in a single question, an order’s delivery date, whether work orders have the materials they need and where there is a risk of delay.

  1. Today The plan is kept in Excel and the ERP is updated afterwards With the agent The delivery date of any order with one question
  2. Today A material shortage is discovered when the line stops With the agent Material availability check for work orders
  3. Today Three people are asked for one delivery date With the agent Orders at risk of delay are flagged in advance

Jobs it takes on

  • Work order and delivery date queries
  • Material availability check
  • Scrap and efficiency reports
  • Delay risk alerts
  • End-of-shift summaries
  • Compiling quality records

The agent prepares, a person approves. Anything that posts a record or sends something outside the company goes through your approval.

Explore Panda AI agents

Frequently asked questions about Maintenance management

Which equipment can be tracked?

Every asset that needs maintenance is followed with a card: production machines, forklifts, compressors, generators, vehicles and air conditioners. If the Fixed Assets Management module is on, the same card also carries custody and depreciation information; the two modules use the same record, so there is no double entry.

Can a maintenance plan be based on running hours?

Yes. Periods are defined by calendar day, running hours or production quantity. The meter value comes from operator entry or from a sensor; equipment nearing its threshold lands on the maintenance list, and the maintenance chief opens the work order and assigns a technician.

How does an operator report a breakdown?

From a phone or the workstation tablet, they select the equipment, tick the breakdown type from a list and attach a photo. The report goes to the maintenance chief, where priority and technician assignment are made, and the assignment comes back to the operator. Downtime starts from the moment of the report.

Are external service jobs recorded too?

Yes. A work order sent to an external service is linked to the supplier card; the service report is attached as a PDF and the invoice is posted to the work order as a cost through the Purchasing module. Work under warranty is flagged separately and no fee is charged.

Do I need sensors for predictive maintenance?

No. Meter, temperature or vibration values can also be entered by hand, and threshold definitions work the same way. When a sensor or IoT device is connected, data flows in automatically and the rule does not change. You can start by hand and add sensors later.

Is maintenance cost visible by equipment?

Yes. Spare parts, labour hours and external service invoices add up on the work order; the equipment card shows annual maintenance cost and breakdown frequency. The renewal decision is made with this report, and the cost goes to the General Accounting module by cost centre.

How are safety steps linked to maintenance?

A lockout-tagout and personal protective equipment checklist is defined for risky equipment; the work order cannot be started until those steps are ticked. Who approved which step and when stays in the audit log and is exported at audit time.

What does the agent do in maintenance?

Running hours, meter readings and breakdown reports are written to the equipment card and compared with the maintenance plan; upcoming maintenance and abnormal values are listed each morning. The maintenance chief approves the work order; the agent does not assign technicians or stop machines.

See Maintenance management with your own data

Describe your process in a few sentences and we will show you the modules that fit.

  • 15+ years of enterprise software experience
  • In the cloud or on your own server
  • Processes compliant with KVKK (Turkey's data protection law)

Last reviewed: · Panda Yazılım product team