Solar plant monitoring and energy management

Monitor your solar plants from the inverter down to the string

Panda Solar collects data from field devices over Modbus TCP and IEC 60870-5-104, shows production live, raises an alarm when a threshold is crossed and gathers all your plants on one map.

Rows of solar panels in an open field under a cloudy sky
Technician installing a solar panel on a roof
Aerial view of solar panels installed on a factory roof
In short

Panda Solar is web-based monitoring and energy management software for solar power plants. It defines the hierarchy of plant, gateway, grid analyzer, inverter, MPPT and string; stores the measurements coming from the devices, produces hourly and daily summaries and runs alarm rules.

  • 01

    The device tree goes down to the string

    Gateway, grid analyzer, inverter, MPPT and string are defined one under the other; you can see which branch the fault is on.

  • 02

    Data is collected over two industry protocols

    Devices are read at regular intervals over Modbus TCP and IEC 60870-5-104.

  • 03

    You write the alarm rule

    Upper limit, lower limit and phase imbalance rules are defined; an alarm is acknowledged and closed.

  • 04

    The whole portfolio on one map

    Plants appear on the map with their status; several customers are managed separately.

What gets missed in running a solar plant?

  • Every inverter has its own portal

    Devices of different brands are monitored from different screens; the whole plant cannot be seen in one place.

  • A fault is noticed from the bill

    A string produces nothing for days, and the loss only shows up in the month-end production report.

  • The cause of low production is unknown

    When production drops, you cannot tell whether it was cloudy or a device had failed.

  • The field team does not know where to go

    The crew heads out without knowing which branch of which device has the problem.

Field devices on one monitoring screen

Measurements are collected from the devices, stored as time series and reflected on the live screen.

What does Panda Solar solve at the plant?

Technician working on rooftop solar panels
Live monitoring

When production drops, see which branch it is on

The device tree goes from the plant down to the string. A device that has not sent data for five minutes is marked offline; the power flow screen shows production, consumption and grid direction.

  • Plant › gateway › inverter › MPPT › string
  • Live measurement and offline warning
  • Hourly and daily production summaries
  • Power flow view
Rows of solar panels under a blue sky
Alarm and SCADA

Define the rule, let the alarm fire by itself

An alarm is raised when a measurement goes above a threshold, below it, or when phases become unbalanced. An alarm moves through active, acknowledged and resolved states. The single-line diagram is drawn with a SCADA editor with sixteen symbols.

  • Upper limit, lower limit and phase imbalance rules
  • Alarm acknowledgement and closing
  • SCADA diagram editor
  • Map device measurements with a tag dictionary
Aerial view of a ground-mounted solar plant
Portfolio

Several plants, several customers

Plants appear on the map at their locations. Weather and irradiance data are shown next to production. EPC and operation-and-maintenance companies manage each customer in a separate account, with license limits.

  • Plant status on a map
  • Weather and irradiance analysis
  • Multi-customer structure and license limits
  • Four user roles, ten interface languages

See how Panda Solar would work in your business

Tell us briefly about your process and we will walk through the screens with your own example.

  • Reply the same business day
  • 15+ years of experience
  • 90 client businesses

How is Panda Solar put into service?

  1. 1

    The plant and device tree are defined

    The plant’s location, installed capacity and device hierarchy are entered.

    Definition
  2. 2

    Devices are connected by protocol

    Modbus TCP or IEC 60870-5-104 addresses and the tag dictionary are mapped.

    Connection
  3. 3

    Alarm rules are written

    Thresholds and phase imbalance rules are defined by device type.

    Rules
  4. 4

    The live screen and map are used

    Production, alarms and plant status are followed from one screen.

    Monitoring

Panda Solar features

  • Plant definition

    Location, installed capacity and the devices connected to the plant.

  • Hierarchical device tree

    Gateway, grid analyzer, inverter, MPPT and string.

  • Tag dictionary

    The measurement addresses of different devices are mapped to common tags.

  • Modbus TCP and IEC 104

    Devices are read regularly over these two protocols.

  • Time series records

    Measurements are stored in a time series database; hourly and daily summaries are produced.

  • Live monitoring

    New measurements appear on screen without refreshing the page.

  • Alarm engine

    Rule-based alarms; active, acknowledged and resolved states.

  • SCADA diagram editor

    A single-line diagram is drawn with sixteen symbols.

  • Map view

    Plants on the map with their locations and status.

  • Weather and irradiance analysis

    Production compared against clear-sky data.

  • Multi-customer structure

    Each customer sees their own data; license limits are defined.

  • Roles and languages

    Four user roles and ten interface languages.

What does Panda AI add alongside Panda Solar?

For Panda Solar, Panda AI takes on these jobs: Site and plant performance summaries; Maintenance plan and fault record queries; Spare parts stock and purchasing tracking.

  1. Today Departments are asked for Excel files for the weekly report With the agent A single-message summary lands on WhatsApp every morning
  2. Today Figures arrive from different systems at different times With the agent Sales, collections, stock and production in one table
  3. Today A critical delay is only noticed in the meeting With the agent The agent alerts you itself when a threshold is crossed

Jobs it takes on

  • Site and plant performance summaries
  • Maintenance plan and fault record queries
  • Spare parts stock and purchasing tracking
  • Contract, licence and permit expiry reminders
  • Daily generation report for management

Sample scenario: In the morning the operations manager asks for yesterday’s generation across all plants and which ones fell below expectations. The agent combines the monitoring data with the maintenance records and lists the likely causes.

The agent prepares, a person approves. Anything that posts a record or sends something outside the company goes through your approval.

Explore Panda AI agents

Do you have a question in mind?

Ask our specialist. If it is not the right fit for you, we will say so.

  • Reply the same business day
  • 15+ years of experience
  • 90 client businesses

Frequently asked questions about Panda Solar

What is Panda Solar?

Panda Solar is web-based software built to monitor solar power plants remotely. It collects data from devices, shows production live, runs alarm rules and gathers plants on a map.

Which devices does it work with?

Panda Solar reads data from inverters, grid analyzers and gateways that communicate over Modbus TCP or IEC 60870-5-104. Your device’s measurement addresses are mapped in the tag dictionary. For a specific brand and model, get in touch and we will check protocol support together.

Who is it for?

It is designed for investors who run their own plants, operation-and-maintenance companies that manage several plants, and EPC companies that offer monitoring as a service to their customers. The multi-customer structure keeps each customer’s data separate.

Does it have maintenance tracking and production report output?

The current version has no maintenance work order module, report export, email and SMS alarm notifications or mobile app. The software is under development; let us talk about the feature you need in a call.

Can Panda Solar be used right now?

Panda Solar is under development and installations are done project by project. If you share your plant’s device structure, we will tell you clearly what is ready.

See Panda Solar with your own data

Describe your process in a few sentences and we will show you the modules that fit.

  • 15+ years of enterprise software experience
  • In the cloud or on your own server
  • Processes compliant with KVKK (Turkey's data protection law)